|
| |
STRANGKO PRODUCTS
CAROUSEL PARLOUR:
Selection of Cow for Which the Milking Was Not Completed
The placement of the hoses optimises the draining of milk. The stainless steel cluster weighs only 1,9 kgs and is equipped with Autostart. When the cluster is lifted for attaching, vacuum and pulsation start automatically.
The design of the entrance and exit sections is the key to optimised capacity in a Side-by-Side rotary. Strangko’s unique design with a wide entrance, guarantees that all milk stands are filled quickly, easily and without “empty” spaces.
Pulsators, Milk-Meters and other equipment are installed on the inside, beneath the platform, and are thereby ensured against moisture in the best possible way. This also gives the milking system a surprisingly low noise level during operation. The washing of the system is done easily from the outside of the platform by operating the washing valve, and connecting the wash water underneath a shutter in the floor, where a tank alarm is built in.
Separate milking in a bucket is done very easily with the special-developed Soffimat detacher. When the milking of the cow is completed the cow can leave the milking platform at the exit. The bucket and detacher continue all the way around and return to the milker without having to stop the platform. This increases the capacity considerably and saves the milker from taking a lot of steps Milking systems equipped with Strangko Milk-Control offer the possibility to separate cows, if the cluster for some reason is detached even though the milking was not completed. These cows will then be let back to the waiting area. This is yet another function securing that the rotary is not stopped, if for instance the cluster is kicked off during the milking.
|
